Jacked-Up Outfeed Roller — The Family Handyman

Jacked-Upward Outfeed Roller

Here's an outfeed roller that you tin can adjust in seconds to support boards coming off stationary power tools of every meridian in your shop.

Here's an outfeed roller that you can adjust in seconds to support boards coming off stationary power tools of every elevation in your shop. And if you bolt the roller to a sturdy sawhorse, only a rampaging bull will knock information technology over. Forth with the sawhorse, y'all'll need:

• A heavy-duty scissors jack.
• A heavy-duty scissors jack.
• A bracketed roller. Purchase the longest roller available if you want to support wide boards and plywood.
• Nuts, Wing-Nuts, bolts and washers to attach the jack, roller and sawhorse.

Information technology'south a snap to build:

1. Drill two holes in both the base and summit of the jack with a metal-cutting bit and drill. You need big-diameter bolts, so drill the largest hole you can.
2. Commodities the roller to the pair of scissors jack and the jack to the sawhorse. Utilise Wing-Nuts under the sawhorse so you tin speedily remove the back up when you need the sawhorse for other jobs.

P.Due south. It'south easy to crank the jack up and down with the jack'due south standard handle, but to do information technology faster, chuck a screw hook in a portable drill, put the hook in the jack's bulldoze hole, and run the drill in forward and reverse to heighten or lower the jack. Thanks to reader Parkis Kennedy for rolling out this thought.

Originally Published: March 13, 2018

princedeparm83.blogspot.com

Source: https://www.familyhandyman.com/article/jacked-up-outfeed-roller/

Share this post